2005 Buick LaCrosse Owner's Manual - Page 323

6. Pull back on the front fascia and then pull the headlamp assembly out from the vehicle. Moving the headlamp up and down slightly may help with its removal. You may have someone assist you with this step. 7. Remove the access cover from behind the bulb being replaced. 8. Turn the bulb socket one-quarter of a turn to remove it from the headlamp assembly. 9. Holding the base of the socket, pull the old bulb from the socket. 10. Replace with a new bulb. 11. Reverse all the steps to reassemble the headlamp assembly. When replacing the plastic retaining clip, push down on it while pushing rearward on the headlamp, making sure the headlamp assembly is secure. 3. Remove the access cover from behind the bulb being replaced. 4. Turn the bulb socket counterclockwise and pull it from the headlamp assembly. 5. Holding the base of the socket, pull the old bulb from the socket. 6. Replace with a new bulb. 7. Reverse Steps 2 through 4 to reinstall. Front Turn Signal and Parking Lamps To replace a front turn signal/parking lamp bulb in the front fascia, do the following: 1. Locate the front turn signal/parking bulb socket by reaching behind the front bumper. 2. Turn the bulb socket counterclockwise and pull it out of the assembly. 3. Holding the base of the socket, pull the old bulb from the socket. 4. Push the new bulb into the socket. 5. Reverse Steps 1 through 3 to reinstall. High-Beam Headlamp Bulbs To replace the high-beam headlamp bulb, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Locate the high-beam headlamp bulb socket. 5-47