2013 Buick Enclave Owner Manual - Page 247

Driving and Operating 9-35 Rear Vision Camera (RVC) The vehicle may have an RVC system. Read this entire section before using it. { WARNING The RVC system does not display children, pedestrians, bicyclists, animals, or any other object located outside the camera's field of view, below the bumper, or under the vehicle. Perceived distances may be different from actual distances. Do not back the vehicle using only the RVC screen, during longer, higher speed backing maneuvers, or where there could be cross traffic. Failure to use proper care before backing may result in injury, death, or vehicle damage. Always check behind and around the vehicle before backing. The rear vision camera system is designed to help the driver when backing up by displaying a view of the area behind the vehicle. When the driver shifts the vehicle into R (Reverse), the video image automatically appears on the infotainment screen. Once the driver shifts out of R (Reverse), the screen will go back to the last screen that had been displayed, after a delay. Turning the Rear Vision Camera System On or Off To turn the rear vision camera system on or off: 1. Shift into P (Park). 2. Press the Settings menu button on the Home screen of the infotainment system. 3. Select the Rear Camera screen button. The Rear Camera screen displays. 4. Select Rear Camera display and then select ON or OFF. The display remains on after shifting out of R (Reverse) for approximately 10 seconds. The display can be canceled during this time by performing one of the following: . Press a hard key on the infotainment system. Shift into P (Park). Reach a vehicle speed of 8 km/h (5 mph). . . Symbols The RVC system may have a feature that lets the driver view symbols on the RVC screen while using the rear vision camera. The Ultrasonic Rear Parking Assist (URPA) system must not be disabled to use the caution symbols. See Ultrasonic Parking Assist on page 9‑31. The symbols appear when an object has been detected by the URPA system. The symbol may cover the object when viewing the RVC screen.