1997 Cadillac Seville Owner's Manual - Page 150

OIL LIFE LEFT (Reset): Press the INFO button to display the OIL LIFE LEFT, then press and hold the INFO RESET button until 100%OIL LIFELEFT is displayed. (This onlyneeds to be reset after you have had the oil changed.) ENGLISHMETRIC (Reset): Press the INFO button to display ENGLISHMETRIC RESET, then press the INFO RESET button to select. The display will change from English (miles) to metric (kilometers). These messages will appear if there is a probien.; s e n s d in one of your vehicle's systems. V'hicles that are first sold in Canada will have a number aftereach message. This number helps toidentify the message which is only displayed in English. INFO: Pressing this button repeatedly will display the RANGE, MPG AVG, MPG INST, GAL FUEL USED, MPH, AVG MPH, TIMER. BATTERY VOLTS. COOLANT TEMP, OIL LIFE LEFT and ENGLISHMETRIC RESET. FUEL DOOR: Press this button to open the fuel door. (This feature will work only when the shift lever is in PARK (Pj regardless of whether or not the vehicle is running.) TRUNK: Press this button toopen the trunk. (This feature will work only when the shift lever is in PARK (P) regardless of whether or not the vehicle is running.) A/C OFF FOR ENGINE PROTECTION - 16: This message displays when the engine coolantbecomes hotter than the normal operating temperature.To avoid added strain on a hot engine, the air conditioning compressor is automatically turned off so that air conditioned air is not deljvered. If the coolant temperature returns to normal, you must select AC to return to a normal A/C compressor operation. If this message continues to appear, have the system repaired as soon as possible to avoid compressor damage. APPLY BRAKE TO SHIFT 46: This message will appear if your vehicle is in PARK (P) for about 15 seconds and the brake is not pressed in. To remove this message from the DIC display, hold the OFF and the blue (cooler) buttons on the digital cluster climate control panel for about five seconds. the analog On cluster climatecontrol panel, press the OFF button (next to the MODE button) and the down arrow on the PASS TEMP button for about five seconds. Hold the same two buttons to display the message again. -