2012 Cadillac CTS Owner Manual - Page 76

3-8 Seats and Restraints Storing Memory Positions To save into memory: 1. Adjust the driver seat, outside mirrors, and the power steering column, if equipped, to the desired driving positions. 2. Press and hold "1" until two beeps sound. 3. Repeat for a second driver using "2." must be applied for a manual transmission. A single beep will sound when the button is pressed. The seat, outside mirrors, and/or power steering column will move to the position previously stored for the identified driver. Automatic Entry Recall If entry/exit recall is programmed on in the vehicle personalization menu, automatic entry recall occurs when the ignition is turned on. See Vehicle Personalization on page 5￿48. To stop recall movement, press one of the power seat, memory, or outside mirror buttons, or the power steering column switch, if equipped. If something has blocked the driver seat or the steering column while recalling a memory position, the recall may stop. Remove the obstruction; then press the Memory Seats On vehicles with the memory feature, memory buttons 1 and 2 on the driver door are used to save and recall memory settings for the driver seat cushion and seatback, outside mirrors, and the steering column position, if the vehicle is equipped with the power tilt and telescopic steering column. 1: Saves and recalls for driver 1. 2: Saves and recalls for driver 2. The vehicle comes with two Remote Keyless Entry (RKE) transmitters. Each transmitter has a number "1" or "2" on it. These numbers correspond to "1" and "2" on the driver door. The current driver is identified when K on the RKE transmitter is pressed, or when "1" or "2" on the driver door is pressed. To recall memory positions, press and release "1" or "2." The vehicle must be in P (Park) for an automatic transmission, or the parking brake B (Exit Button): Moves the driver seat and/or power steering column to the exit position. See "Exit Recall" later in this section.