2013 Cadillac SRX Owner Manual - Page 300

10-32 Vehicle Care 3. Remove the taillamp cover from the lamp assembly by pulling rearward from the top to unfasten from the snap tabs. 10. Reinstall the taillamp cover by snapping it into place. 11. Push the push pin to secure the taillamp cover. Back-Up Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2‑13. 6. Disconnect the wiring harness connector from the back-up bulb/ socket assembly. 4. Remove the two screws from the taillamp assembly. 5. Pull the taillamp assembly straight back to remove. 2. Remove the push pin (1) on the taillamp cover (2). 7. Turn the back-up bulb socket counterclockwise to remove it from the taillamp assembly. 8. Install a new bulb/socket assembly into the taillamp assembly, and turn the bulb/ socket clockwise until it clicks. 9. Reinstall the taillamp assembly and tighten the screws.