2013 Cadillac SRX Owner Manual - Page 301

Vehicle Care 10. Reinstall the taillamp cover by snapping it into place. 11. Push the push pin to secure the taillamp cover. 3. Turn the lamp assembly down to remove from liftgate. 10-33 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place. Replacement Bulbs Exterior Lamp Back-up Lamp Daytime Running Lamp Headlamp High-Beam 4. Turn the bulb socket (1) counterclockwise to remove from lamp assembly (3). 5. Pull the bulb (2) straight out of the bulb socket. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly. 7. Turn the lamp assembly into the liftgate engaging the clip side first. Headlamp Low-Beam License Plate Lamp Turn Signal Front Tail/Turn Signal Rear Bulb Number Hyperclick PH16W 7443 ULL 9005LL H11LL W5WLL 7444NA 7440 License Plate Lamp To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2‑13. Passenger Side Shown, Driver Side Similar 2. Push the left end of the lamp assembly towards the right. For replacement bulbs not listed here, contact your dealer.