2013 Cadillac SRX Owner Manual - Page 63

Seats and Restraints 2. Push and pull on the seatback to make sure it is locked. 3-7 Memory Seats Storing Memory Positions To save positions to the "1" and "2" buttons: 1. Adjust the driver seat, seatback recliner, both outside mirrors, and adjustable pedals to the desired driving positions. 2. Press and hold MEM (Memory) and "1" at the same time until a beep sounds. 3. Repeat Steps 1 and 2 for a second driver using "2." Power Reclining Seatbacks To adjust a power seatback, if available: . Tilt the top of the control rearward to recline. Tilt the top of the control forward to raise. If equipped, the "1," "2," and MEM buttons on the outboard side of the driver seat are used to manually save and recall the positions of the driver seat, outside mirrors, and adjustable throttle and brake pedal positions. Manually Recalling Memory Positions Press and hold "1" or "2" to manually recall the previously stored memory positions. Releasing "1" or "2" before the stored positions are reached stops the recall. There is also the ability to press and release "1" or "2" to manually recall the previously stored memory positions. The ignition must be in ON/RUN/START, and the transmission must be in P (Park). .