2014 Cadillac XTS Owner Manual - Page 61

Seats and Restraints 3-7 Memory Seats Storing Memory Positions To save positions to the "1" and "2" buttons: 1. Adjust the driver or passenger seat to the desired position. If storing a driver position, also adjust the outside mirrors and the power tilt and telescoping steering column 2. Press and hold SET and "1" at the same time until a beep sounds. 2. Press and hold SET and B at the same time until a beep sounds. Manually Recalling Memory Positions If the vehicle is off, or in ON/RUN/ START but not in P (Park), press and hold "1," "2," or B to manually recall the previously stored memory positions. Releasing "1," "2," or B before the stored positions are reached stops the recall. If the vehicle is in ON/RUN/START and in P (Park), press and release "1," "2," or B to manually recall the previously stored memory positions. Placing the ignition in OFF/LOCK before the stored positions are reached stops the recall. If something has blocked the seat and/or power tilt and telescoping steering column while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item Driver Buttons Shown, Passenger Buttons Similar 3. Repeat Steps 1 and 2 for a second driver using "2." To save positions to the B (Exit) button and easy exit features: 1. Adjust the driver or passenger seat to the desired position for getting out of the vehicle. If storing a driver exit position, also adjust the power tilt and telescoping steering column and the outside mirrors on some vehicles. B (Exit) buttons on the driver door and front passenger door are used to manually save and recall memory settings for the driver and passenger seats. The driver memory buttons also store outside mirror and power tilt and telescoping steering column positions. If equipped, the SET, "1," "2," and