1994 Chevrolet Camaro Owner's Manual - Page 66

Features and Controls a 2 (Second Gear)- Press the clutch pedal as you let up on the accelerator pedal and shift into "2."Then, slowly let up on the clutch pedal as you press the accelerator pedal. a 3,4,5 and 6 (Third, Fourth, Fifth and Sixth Gears)- Shift into "3," "4," "5" and "6" the same way you do for "2." Slowly let up on theclutch pedal as you press the accelerator pedal. 0 To Stop - Let up on the accelerator pedal and press the brake pedal. Just before the vehicle stops, press the clutch pedal and the brake pedal, and shift to "Neutral." 0 Neutral - Use this position when you start or idle your engine. 0 R (Reverse) -To back up, press down the clutch pedal and shift into "R." Let up on the clutch pedal slowly while pressing the accelerator pedal. If you shift from "6" into "R," the shift lever must be first placed in the "Neutral" position centered between "2" and "3" prior to shifting into "R." Your six-speed manual transmission has a feature that allows you to safely shift into "R' (Reverse) while the vehicle is rolling (at less than 5 mph). You will be "locked-out" if you try to shift into "R' (Reverse) while your vehicle is moving faster than 5 mph. If you have turned your ignitionoff and wish to park your vehicle in Reverse, you will have to move the shift lever quickly to the right, "crashing" through the high load spring and then into gear. SKIP SHIFT Skip Shift Light (5.7LLT1 Engine) When this light comes on, you can only shift from "1" (First) to "4" (Fourth) gear instead of "1" (First) to "2" (Second) gear. This helps you to get the best possible fuel economy. This light will come on under these conditions: 0 The engine coolant temperature is greater than 170°F (77"C), 0 You are going 15-20 mph (24-32 km/h), and 0 You are at 35% throttle or less. ...64