2001 Chevrolet Venture Owner's Manual - Page 137

1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Turn the parking lamps on, then off. 3. Count the number of chimes you hear. The number of chimes indicates the vehicle's current programmed mode. (If you do not wish to change the current mode, you can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.) 4. Turn the parking lamps on, then off to change the current mode. 5. Turn the parking lamps on, then off until you hear the number of chimes corresponding to the mode selection you want. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. With the arming and disarming feature, you can program the vehicle to do the following: D Arm the system when you lock the doors using either power door lock switch while any door or the liftgate is open and the key is removed from the ignition. key or remote keyless entry transmitter and the key is removed from the ignition. your key or remote keyless entry transmitter. D Arm the system when you lock the doors with your D Disarm the system when you unlock the doors with Programmable Modes Mode 1: Power Door Lock Switch Arming Off D The system will arm when you lock the doors with your key or remote keyless entry transmitter. The key must be removed from the ignition when you lock the doors or the content theft-deterrent system will not arm. with your key or remote keyless entry transmitter. Arming and Disarming the Content Theft-Deterrent System To arm and disarm the content theft-deterrent system, the system must be turned on by using Modes 1, 2 or 4 listed previously in this section under "Content Theft-Deterrent System." D The system will disarm when you unlock the doors 2-24