2001 Chevrolet Venture Owner's Manual - Page 391

4. Remove the bulb holder by pressing the four retaining tabs and pulling the holder away from the assembly. 6. Snap the bulb holder back into place, making sure all retaining tabs are properly over the bulb holder tabs. 7. Reinstall the taillamp assembly by inserting the outboard locating/retaining pins until the lamp is seated. Secure with the inboard screws. Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear and cracking. See "Wiper Blade Check" in the Index for more information. Replacement blades come in different types and are removed in different ways. For the proper type and length, see "Normal Maintenance Replacement Parts" in the Index. To remove the wiper blade(s) do the following: 1. Turn the wipers on to the lowest intermittent setting. A. Taillamp Bulb B. Back-Up Lamp Bulb C. Turn Signal Lamp Bulb D. Stop/Taillamp Bulb 5. Replace the bulb(s) by pulling the old bulb(s) out and gently pushing the new bulb(s) into the bulb holder socket. 2. Turn the ignition to OFF while the wipers are at the outer positions of the wipe pattern. The blades are more accessible for removal/replacement while in this position. 3. Pull the windshield wiper arm away from the windshield or backglass. 6-40