2002 Chevrolet Prizm Owner's Manual - Page 106

Setting Cruise Control Resuming a Set Speed Suppose the cruise control is set at a desired speed and then you apply the brake. This will shut off cruise control. But you won't need to reset it. Unless you're going about 25 mph (40 km/h) or less or you slowed down to 10 mph (16 km/h) less than your preset speed, you can push the lever up to RES/ACC (Resume/Accelerate). You'll go right back up to your chosen speed and stay there. If your preset speed cancels out when it shouldn't, there may be a problem with your vehicle's cruise control. See your dealer. CAUTION: If you leave your cruise control switch on when you're not using cruise, you might hit a button and go into cruise when you don't want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. 1. Press the button at the end of the cruise control lever to turn on cruise control. The CRUISE light on the instrument panel cluster will come on. See "Cruise Light" in the Index for more information. 2. Get up to the speed you want. 3. Push the lever down to SET/COAST and release it. 4. Take your foot off the accelerator pedal. 2-34