2002 Chevrolet Prizm Owner's Manual - Page 12

Rear Head Restraint Removal To remove the rear head restraints, do the following: 1. Press the release button located under the right rear side of the head restraint. 2. Lift the head restraint upward. 3. Secure the head restraints in the trunk using the tie-down straps located on each side of the trunk floor. To reinstall the rear head restraints, do the following: 1. Remove the head restraints from the trunk. 2. Press and hold the release button on the seatback while inserting the head restraint. 3. Push the head restraint down. After releasing the button, pull on the head restraint to make sure it is locked in place. Rear Folding Seatback (If Equipped) If your vehicle is equipped with this feature, you can fold either side of the seatback down in your vehicle for more cargo space. On vehicles with a built-in child restraint system, only the driver's side rear passenger seatback can be folded down. Make sure the front seatback isn't reclined. If it is, the rear seatback won't fold down all the way. CAUTION: A safety belt that is improperly routed, not properly attached, or twisted won't provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted. 1-6