2007 Chevrolet Corvette Owner's Manual - Page 12

Easy Exit Seat Two personalized exit positions can also be programmed to allow for an easy exit or entry into the vehicle. The controls for this memory function are located on the driver's door. B (Easy Exit Seat): This button is used to program and recall the desired driver's seat exit position. To program an exit position, use the following steps: 1. Recall the desired driving position by pressing button 1 or 2. The seat will move to the programmed memory position. 2. Position the seat and the telescopic steering column position to a comfortable exit position. 3. Press and hold the exit button until two beeps sound. Your exit position is now programmed. A second exit position can be programmed by repeating the above steps and pressing the other memory button. To recall an exit position, do one of the following: • If you have an automatic transmission vehicle, press and release the exit button while the vehicle is in PARK (P). One beep will sound and the exit position for the currently identified driver will be recalled. • If you have a manual transmission vehicle, press and release the exit button. The parking brake needs to be set to recall the memory position. One beep will sound and the exit position for the currently identified driver will be recalled. If your vehicle has the Auto Exit Recall feature and it is turned on in the DIC, automatic seat and telescopic steering column movement to the exit position will occur when you use the keyless access transmitter to unlock your vehicle or when you turn the engine off and open the driver's door. See "Auto Exit Recall" under DIC Vehicle Personalization on page 232 for more information. 12