2007 Chevrolet Monte Carlo Owner's Manual - Page 345

Taillamps, Stoplamps and Back-up Lamps A. Rear Sidemarker Lamp B. Taillamp/Turn Signal and Stoplamp C. Taillamp 5. Pull the assembly from the vehicle. 6. Remove the bulb socket. To do so, press the tab, turn it counterclockwise and pull it out. 7. Pull the old bulb straight out. 8. Push the new bulb into the bulb socket. 9. Reverse Steps 1 through 5 to reinstall the taillamp assembly. Back-Up Lamps The back-up lamps are located in the rear bumper. To replace one of these bulbs, do the following: 1. Open the trunk. See Trunk on page 101 for more information. 2. Remove the convenience net, if your vehicle has one, and then remove it by unhooking the upper wing nut. 3. Pull the carpet away from the rear of the vehicle. 4. Remove the two remaining wing nuts. 1. Remove the two screws from the back-up lamp assembly. 2. Pull the assembly from the rear bumper. 345