2007 Chevrolet Monte Carlo Owner's Manual - Page 346

3. Remove the socket by turning it counterclockwise and pull it out. 4. Pull the old bulb straight out. 5. Push the new bulb into the socket. 6. Push the socket back into the assembly. Tighten the socket by turning it clockwise. 7. Reinstall the assembly with the two screws. Replacement Bulbs Exterior Lamp Back-Up Lamp Front Parking/Turn Signal Lamp License Plate Lamp Headlamps High-Beam Low-Beam Sidemarker Lamp Stoplamps, Taillamps, and Turn Signal Lamp H9 H11 194 3057 Bulb Number 921 3157NAK 194 License Plate Lamp To replace one of these bulbs, do the following: 1. Turn the lamp assembly counterclockwise and pull the lamp assembly out of the connector. 2. Pull the old bulb from the lamp assembly, keeping the bulb straight as you pull it out. 3. Install the new bulb. 4. Reverse Steps 1 through 3 to reinstall the license plate lamp. For replacement bulbs not listed here, contact your dealer. 346