2010 Chevrolet Aveo Owner's Manual - Page 151
2010 Chevrolet Aveo Manual
Page 151 highlights
Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. The lever returns to its starting position whenever it is released. If after signaling a turn or a lane change the arrow flashes rapidly or does not come on, a signal bulb may be burned out. Have the bulbs replaced. If the bulb is not burned out, check the fuse. See Fuses and Circuit Breakers on page 6‑87. Headlamp High/Low-Beam Changer The headlamps must be on for this feature to work. Push the turn signal lever away from you to turn the high beams on. This instrument panel cluster light 3 comes on while the high beams are on and the ignition is turned to ON/RUN. Pull the lever towards you to return to low beams. Flash-to-Pass This feature is used to signal to the vehicle ahead that you want to pass. Pull the turn signal/multifunction lever towards you until the high-beam headlamps come on, then release the lever to turn them off. 4-5