2010 Chevrolet Aveo Owner's Manual - Page 44

Unfolding the Seatbacks To return the seatback to the upright position: 1. Hook the safety belts into the safety belt guide. 2. Lift the seatback up and push it to its original position. { WARNING: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted. 6. Insert the safety belt strap back into the safety belt guide. { WARNING: If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. 3. Push down and rearward firmly on the top of the seatbacks until it latches securely in the fully upright position. 4. To reattach the center seat safety belt to the mini buckle, pull it from the retractor. 5. Push the latch plate at the end of the safety belt strap into the mini-buckle until the mechanism clicks. Make sure the strap is not twisted. The sliding latch plate will face the front of the vehicle. Rear Seat Operation (Hatchback) Folding the Rear Seats The rear seats can be folded to increase cargo space. To fold the rear seats: 1. Lower the head restraints completely. 2. Unlatch the center safety belt by pressing the red button on the buckle. 2-10