2013 Chevrolet Silverado 1500 Crew Cab Owner Manual - Page 413

Vehicle Care 10-37 Pick-Up Box Identification and Fender Marker Lamps The pick-up box identification lamps are LEDs. For replacement of the LED lighting assembly contact your dealer. To replace a pickup box fender marker lamp bulb: 1. Press the tab from the back to remove the lamp. 2. Turn the bulb socket counterclockwise to remove from the lamp assembly. 3. Gently pry the bulb from the socket. 4. Install the new bulb in socket. 5. Reinstall socket into lamp assembly. 6. Reinstall the lamp assembly. Taillamps (Chassis Cab Models) 4. Install a new bulb into the socket, turn it clockwise, and press it in until it is tight. 5. Reinstall the lens and the four screws. Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps A. Backup Lamp B. Stoplamp/Taillamp/Turn Signal Lamp To replace one of these bulbs: 1. Remove the four screws. 2. Lift the lens off the lamp assembly. 3. Turn the old bulb counterclockwise and pull it straight out from the socket. A. Stoplamp/Taillamp/Turn Signal Lamp B. Back-up Lamp