2013 Chevrolet Volt Owner Manual - Page 202
2013 Chevrolet Volt Manual
Page 202 highlights
9-16 Driving and Operating open and the vehicle is not on. The flashing light will eventually time out. The POWER O button light is on steady when in ON/RUN power mode. When the vehicle is turned off, the POWER O button light will turn off. The Remote Keyless Entry (RKE) transmitter must be in the vehicle for the system to operate. If the vehicle will not start, place the RKE transmitter in the transmitter slot. See Remote Keyless Entry (RKE) System Operation on page 2‑2. ON/RUN: This position is for starting and driving. With the vehicle off, and the brake pedal applied, pressing the POWER O button once will place the vehicle in ON/RUN. When the READY light is on in the instrument cluster, the vehicle is ready to be driven. This could take up to 15 seconds at extremely cold temperatures. See Vehicle Ready Light on page 5‑26. The engine will only start if needed. If the vehicle did not start, the instrument cluster will display a screen with inactive fuel and battery gauges. See Starting and Stopping the Vehicle on page 9‑17. Service Only Mode This power mode is available for service and diagnostics, and to verify the proper operation of the malfunction indicator lamp as may be required for emission inspection purposes. With the vehicle off, and the brake pedal not applied, pressing and holding the POWER O button for more than five seconds will place the vehicle in Service Only Mode. The instruments and audio systems will operate as they do in ON/RUN, but the vehicle will not be able to be driven. The propulsion system will not start in Service Only Mode. Push the button again to turn the vehicle off. Notice: Service Only Mode will discharge the 12‐volt battery. Do not use Service Only Mode for an extended period, or the vehicle may not start. Starting and Operating New Vehicle Break-In Notice: The vehicle does not require a break-in period. Vehicle break‐in is performed during manufacturing. Power Button The vehicle has an electronic push‐ button start. The POWER O button light flashes when the driver door is