2014 Chevrolet Express 2500 Passenger Owner Manual - Page 106

5-6 Instruments and Controls AM-FM Radio To set the time: 1. Press H until the hour begins flashing on the display. Press this button a second time and the minutes begin flashing on display. Press H a third time and the 12HR or 24HR time format begins flashing. 2. While either the hour or the minutes are flashing, turn the f knob, on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. While the 12HR or 24HR time format is flashing, turn the f knob clockwise or counterclockwise to select the default time settings. 3. Press H again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing stops after five seconds and the current time displayed is automatically set. 4. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in tight circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE for a few seconds when the calibration is complete. The DIC display will then return to PRESS V TO CALIBRATE COMPASS. Radio with CD/MP3 To set the time and date: 1. Press H and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays. 2. Press the softkey under any one of the tabs to be changed. Every time the softkey is pressed again, the time or the date if selected, increases by one. Another way to increase the time or date, is to press ¨ SEEK or \ FWD (forward). 3. To decrease, press © SEEK or s REV. Turn the f knob, on the upper right side of the radio, to adjust the selected setting. Clock The clock can be set with either the radio turned on or off.