2007 Chrysler Pacifica Owner's Manual - Page 351
2007 Chrysler Pacifica Manual
Page 351 highlights
WHAT TO DO IN EMERGENCIES 351 1. Remove the spare wheel, scissors jack and jack-handle from stowage. 2. Carefully pry off the wheel center cap if equipped, using the tip of the jack handle. 3. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. NOTE: Do not oil wheel studs. For chrome wheels, do not substitute with chrome plated wheel nuts. 4. There are two jack engagement locations on each side of the body - refer to the following illustration. 6 Jack Engagement Locations 5. These locations are on the sill flange on the underside of the body. The jack is to be located, engaging the flanges, 20 cm (8 inches) inward from the edge of the wheel opening closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described