2007 Chrysler Sebring Owner Manual Sedan - Page 113

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 ELECTRONIC SPEED CONTROL - IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The speed control lever is located on the right side of the steering wheel. OFF, push the ON/OFF button a second time. The CRUISE indicator will turn off. The system should be turned OFF when not in use. NOTE: The Electronic Speed Control System will automatically turn itself off when the ignition key is turned to the "OFF" position. 3 WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it. To Set At A Desired Speed: When the vehicle has reached the desired speed, press down on the lever and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: • The vehicle must be traveling at least 25 mph (40 km/h) for the speed control to set. Speed Control Location To Activate: Push the ON/OFF button located in the end of the Electronic Speed Control Lever. The CRUISE indicator in the instrument cluster will illuminate. To turn the system