2007 Chrysler Sebring Owner Manual Sedan - Page 182
2007 Chrysler Sebring Manual
Page 182 highlights
182 UNDERSTANDING YOUR INSTRUMENT PANEL This radio has a hard drive. CD's can be ripped to the hard drive, and the map data comes loaded on the hard drive. Refer to your "Navigation User's Manual" for detailed operating instructions. Operating Instructions - Satellite Radio Refer to your "Navigation User's Manual" for detailed operating instructions. Clock Setting Procedure The GPS receiver used in this system is synchronized to the time data being transmitted by the GPS satellite. The satellites' clock is Greenwich Mean Time (GMT). This is the worldwide standard for time. This makes the system's clock very accurate once the appropriate time zone and daylight savings information is set. To manually set the clock, change the time zone, or change daylight savings information, use a ball point pen or similar object to press the hour (H) or minute (M) buttons on the radio. The Setup screen appears. Setting the Clock 1. Turn the ignition switch to the ON or ACC position. Using the tip of a ballpoint pen or similar object, press either the H button on the faceplate to change the hour or the M button on the faceplate to change the minute. 2. The time setting will increase each time you press the button. Holding either button in will fast forward the setting. 3. If no changes are made within 5 seconds of accessing the Setup screen, the screen will time out and you will be taken to the last mode. NOTE: To reset the clock, select the appropriate time zone and press ENTER. The clock will revert to the accurate time based on the time zone you selected. Changing the Time Zone 1. Highlight "Clock Setup" and press ENTER. 2. At the Clock Setup screen highlight the box next to "Time Zone" and press ENTER. 3. Highlight the appropriate time zone for you location and press ENTER to store your selection. Select "Done" when finished.