2008 Chrysler 300 Owner Manual - Page 150

150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Set At A Desired Speed: When the vehicle reaches the speed desired, push the lever down and release ("SET DECEL"). Remove your foot from the accelerator pedal and the vehicle will operate at the selected speed. NOTE: • Speed control will only function in third, fourth, or fifth gear when in the Autostick௡ Mode (if equipped). • The speed control may not engage if a different size tire is installed on one wheel, such as the compact spare tire. To Deactivate: The system will disable Electronic Speed Control without erasing the memory if you: • Softly tap the brake pedal. • Depress the brake pedal. • Pull the speed control lever toward you ("CANCEL"). Pushing and releasing the ("ON/OFF") button or turning off the ignition erases the set speed from memory. To Resume Speed: If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set speed. To do so, push the lever up and release ("RESUME ACCEL"), and then remove your foot from the accelerator pedal. To Vary the Speed Setting: When the speed control is set, you can increase speed by pushing up and holding the lever ("RESUME ACCEL"). When the lever is released, a new set speed will be established.