2012 Chrysler 200 Owner Manual - Page 205

UNDERSTANDING YOUR INSTRUMENT PANEL 203 If the ABS light remains on or comes on during driving, 24. Electronic Stability Control (ESC) Activation/ it indicates that the Anti-Lock portion of the brake system Malfunction Indicator Light - If Equipped The "ESC Activation/Malfunction Indicator is not functioning and that service is required, however, Light" in the instrument cluster will come on the conventional brake system will continue to operate when the ignition switch is turned to the normally provided that the BRAKE warning light is not on. ON/RUN position. It should go out with the engine running. If the "ESC Activation/Malfunction InIf the ABS light is on, the brake system should be serviced dicator Light" comes on continuously with the engine as soon as possible to restore the benefit of Anti-Lock running, a malfunction has been detected in the ESC Brakes. system. If this light remains on after several ignition The ABS warning light should be checked frequently to cycles, and the vehicle has been driven several miles assure that it is operating properly. Turn the ignition key (kilometers) at speeds greater than 30 mph (48 km/h), see to the on position, but do not start the vehicle. The light your authorized dealer as soon as possible to have the should come on. If the light does not come on, have the problem diagnosed and corrected. system inspected by an authorized dealer. NOTE: • The "ESC Off Indicator Light" and the "ESC Activation/Malfunction Indicator Light" come on momentarily each time the ignition switch is turned to ON/RUN. 4