2012 Chrysler 200 Owner Manual - Page 403

WHAT TO DO IN EMERGENCIES 401 1. Connect the positive (+) end of the jumper cable to the 5. Start the engine in the vehicle that has the booster remote positive (+) post of the discharged vehicle. battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery. Once the engine is started, remove the jumper cables in the reverse sequence: 3. Connect the negative end (-) of the jumper cable to the negative (-) post of the booster battery. 6. Disconnect the negative (-) jumper cable from the remote negative (-) post of the vehicle with the dis4. Connect the opposite end of the negative (-) jumper charged battery. cable to the remote negative (-) post of the vehicle with the discharged battery. 7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery. WARNING! Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 6 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle.