2014 Chrysler 300 User Guide - Page 30

O P E R AT I N G YO U R V E H I C L E • Rotate the dimmer control up to the next detent position to fully brighten the odometer and radio when the parking lights or headlights are on. Refer to the Uconnect® Settings in your vehicle's Owner's Manual on the DVD or Programmable Features in this guide for display dimming. • Rotate the dimmer control up to the last detent position to turn on the interior lighting. Ambient Light Dimmer • Rotate the ambient light control up or down to increase or decrease the brightness of the release handle, map pocket (if equipped), overhead and floor lighting when the parking lights or headlights are on. SPEED CONTROL • The Speed Control switches are located on the steering wheel. Cruise ON/OFF • Push the ON/OFF button to activate the Speed Control. will appear on the • CRUISE READY instrument cluster to indicate the Speed Control is on. • Push the ON/OFF button a second time to turn the system off. SET • With the Speed Control on, push and release the SET - button to set a desired speed. Accel/Decel To Increase Speed • When the Electronic Speed Control is set, you can increase speed by pushing the RES + button. • The speed increment shown is dependant on the speed of U.S. (mph) or Metric (km/h) units: U.S. Speed (mph) • Pressing the RES + button once will result in a 1 mph increase in set speed. Each subsequent tap of the button results in an increase of 1 mph. • If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. Metric Speed (km/h) • Pressing the RES + button once will result in a 2 km/h increase in set speed. Each subsequent tap of the button results in an increase of 2 km/h. • If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. 28