2007 Dodge Dakota Owner Manual - Page 338
2007 Dodge Dakota Manual
Page 338 highlights
338 MAINTAINING YOUR VEHICLE • Rotate bulb socket 1/4 turn and remove socket from housing. • Pull bulb straight from socket. • Reverse procedure to install new turn signal bulb. Rear Side Marker, Taillamps/Stoplamp, and Turn Signal Bulbs - Replacement 1. Remove the two (2) screws that pass through the bed sheetmetal. Disconnecting Turn Signal Connector Removing the Two (2) Screws
•
Rotate bulb socket 1/4 turn and remove socket from
housing.
•
Pull bulb straight from socket.
•
Reverse procedure to install new turn signal bulb.
Rear Side Marker, Taillamps/Stoplamp, and Turn
Signal Bulbs — Replacement
1. Remove the two (2) screws that pass through the bed
sheetmetal.
Disconnecting Turn Signal Connector
Removing the Two (2) Screws
338
MAINTAINING YOUR VEHICLE