2010 Dodge Nitro Owner Manual - Page 21
2010 Dodge Nitro Manual
Page 21 highlights
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE On Electronic Vehicle Information Center (EVIC) NOTE: • For the remote starting feature (if equipped), refer to equipped vehicles, refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer"Remote Starting System" for further information. Programmable Features)" in "Understanding Your In• Your vehicle's RKE transmitter may have three or four strument Panel" for further information. buttons depending on the optional features purchased On non-EVIC equipped vehicles, perform the following with your vehicle. steps: To Unlock the Doors and Liftgate Press and release the UNLOCK button on the RKE 1. Press and hold the LOCK button on a programmed transmitter once to unlock the driver's door or twice to (i.e., functional) RKE transmitter for at least four seconds, unlock all doors and the liftgate. The parking lights will but not longer than 10 seconds. Then, press and hold the flash to acknowledge the unlock signal. The illuminated UNLOCK button while still holding the LOCK button. entry system will also turn on. 2. Release both buttons at the same time. Remote Key Unlock, Driver Door/All Doors First 3. Test the feature from outside the vehicle by pressing This feature lets you program the system to unlock either the LOCK and UNLOCK buttons on the RKE transmitter. the driver's door or all doors and the liftgate on the first press of the UNLOCK button on the RKE transmitter. To 4. Repeat these steps if you want to return this feature to change the current setting, proceed as follows: its previous setting.