1996 Ford Mustang Owner's Manual - Page 200
1996 Ford Mustang Manual
Page 200 highlights
Jump-Starting 1. Make sure that the jumper cables are not in the way of moving engine parts, then start the booster vehicle. Run the engine at a moderate speed. Let the discharged battery charge for a few minutes and then start the disabled vehicle. It may take a couple of tries before the vehicle starts. If the vehicle does not start after several attempts, there may be a different problem. When both vehicles are running, let them idle for a few minutes to charge the discharged battery. Always remove the jumper cables in the reverse order. Remove the negative ( ) end of the jumper cable from the metallic surface on the engine or frame of the disabled vehicle. Remove the negative ( ) cable from the booster battery. Remove the positive (+) cable from the booster battery. Remove the other end of the positive (+) cable from the discharged battery. 2. 3. Removing jumper cables 1. 2. 3. 4. After the vehicle is started, let it idle for a while to let the engine "relearn" its idle conditions. Drive it around for a while with all electrical accessories turned off to let the battery recharge. You may need to use a battery charger to fully recharge the battery. 204