2000 Ford Ranger Owner's Manual - Page 12

Instrumentation Check gage (if equipped) Illuminates when the engine coolant CHECK temperature is high, the engine oil GAGE pressure is low or the fuel gauge is at or near empty. The ignition must be in the ON position for this lamp to illuminate. The lamp will also illuminate when the ignition is turned to the ON position. Refer to Engine coolant temperature gauge, Engine oil pressure gauge or Fuel gauge in this chapter for more information. Four wheel drive low (if equipped) Momentarily illuminates when the 4WD ignition is turned to the START LOW position. Illuminates when four-wheel drive low is engaged. If the light continues to flash have the system serviced. Four wheel drive high (if equipped) Momentarily illuminates when the ignition is turned to the START position. Illuminates when fourwheel drive high is engaged. If the light continues to flash have the system serviced. Door ajar Illuminates when the ignition is in the ON or START position and any door is open. 4WD HIGH DOOR AJAR Speed control This light comes on when either the SPEED SET/ACCEL or RESUME controls are pressed. It turns off when the CONT speed control OFF control is pressed, the brake is applied or the ignition is turned to the OFF position. 12