2000 Ford Ranger Owner's Manual - Page 199
2000 Ford Ranger Manual
Page 199 highlights
Maintenance and care Replacing front side marker bulbs 1. Open the hood. 2. Remove two screws from the lamp assembly. 3. Disengage lamp assembly (it has a snap fit). 4. Disconnect the electrical connector from the bulb by pulling rearward. 5. Rotate bulb socket counterclockwise about 1⁄4 turn and remove from lamp assembly. 6. Carefully pull bulb straight out of socket and push in the new bulb. 7. Insert the bulb into the parking lamp assembly. When the grooves in the plastic base are aligned, push the bulb into the lamp assembly until the plastic base contacts the rear of the lamp assembly and turn to lock. 8. Connect the electrical connector into the rear of the plastic base until it "snaps." 9. Align the lamp studs with the plastic grommets on the vehicle and push to snap in place. 10. Install two screws on lamp assembly. 199