2000 Ford Ranger Owner's Manual - Page 68

Controls and features other objects on the key ring held away from the ignition key. Check to make sure the encoded ignition key is an approved Ford encoded ignition key. Spare SecuriLock keys can be purchased from your dealership and programmed to your SecuriLock passive anti-theft system. Refer to Programming spare SecuriLock keys for more information. If one or both of your SecuriLock keys are lost or stolen and you want to ensure the lost or stolen key will not operate your vehicle, bring your vehicle and all available SecuriLock keys to your dealership for reinitialization. Theft indicator The theft indicator on the instrument cluster will operate as follows: • When the ignition is OFF, the theft indicator will flash briefly every two seconds to indicate the SecuriLock system is protecting your vehicle. • When the ignition is turned to RUN or START, the theft indicator will light for three seconds and then go out. If the theft indicator stays on for an extended period of time or flashes rapidly, have the system serviced by your dealership or a qualified technician. The Theft indicator is controlled by the SecuriLock system. During the 30 second prearm state, it is normal to see the theft indicator pulse brighter behind the constant glow. Programming spare SecuriLock keys Spare SecuriLock keys can be purchased from your dealership and programmed to your SecuriLock passive anti-theft system (up to a total of eight keys). Your dealership can program your new SecuriLock key(s) to your vehicle or you can do it yourself using the following simple procedure. To program a new SecuriLock key yourself, you will need two previously programmed SecuriLock keys (keys that already operate your vehicle's engine). If two previously programmed SecuriLock keys are not available (one or both of your original keys were lost or stolen), you must bring your vehicle to your dealership to have the spare SecuriLock key(s) programmed. 68