2002 Ford Thunderbird Owner's Manual - Page 218

2002 Ford Thunderbird Manual

Page 218 highlights

Maintenance and Specifications be changed any time the rear axle has been submerged in water. Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole. 4 Ensure the correct automatic transmission fluid is used. MERCON and MERCON V are not interchangeable. DO NOT MIX MERCON and MERCON V. Refer to the scheduled maintenance guide to determine the correct service interval. Approximate dry capacity, includes cooler and tubes. Fluid level should be checked by a qualified service technician. LUBRICANT SPECIFICATIONS Ford part name Brake fluid Motorcraft High Performance DOT 3 Motor Vehicle Brake Fluid 1 Door Silicone weatherstrips Lubricant Door latch, hood Multi-Purpose Grease latch, auxiliary hood latch, door hinges, striker plates, seat tracks and fuel filler door hinge Engine coolant Motorcraft Premium Engine Coolant (green-colored) Motorcraft Premium Gold Engine Coolant (yellow-colored) Item Ford part number PM-1 Ford specification ESA-M6C25-A and DOT 3 5 F5AZ-19553-AA XL-4 or XL-5 ESR-M13P4-A ESB-M1C93-B or ESR-M1C159-A VC-4-A (US) or ESE-M97B44-A CXC-10 (Canada VC-7-A (VC-7-B WSS-M97B51-A1 in Oregon) 218

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232

be changed any time the rear axle has been submerged in water. Fill 6
mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
4
Ensure the correct automatic transmission fluid is used. MERCON
²
and
MERCON
²
V are not interchangeable. DO NOT MIX MERCON
²
and
MERCON
²
V. Refer to the scheduled maintenance guide to determine
the correct service interval.
5
Approximate dry capacity, includes cooler and tubes. Fluid level should
be checked by a qualified service technician.
LUBRICANT SPECIFICATIONS
Item
Ford part
name
Ford part
number
Ford
specification
Brake fluid
Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
1
PM-1
ESA-M6C25-A
and DOT 3
Door
weatherstrips
Silicone
Lubricant
F5AZ-19553-AA
ESR-M13P4-A
Door latch, hood
latch, auxiliary
hood latch, door
hinges, striker
plates, seat
tracks and fuel
filler door hinge
Multi-Purpose
Grease
XL-4 or XL-5
ESB-M1C93-B or
ESR-M1C159-A
Engine coolant
Motorcraft
Premium Engine
Coolant
(green-colored)
VC-4–A (US) or
CXC-10 (Canada
ESE-M97B44–A
Motorcraft
Premium Gold
Engine Coolant
(yellow-colored)
VC-7-A (VC-7–B
in Oregon)
WSS-M97B51-A1
Maintenance and Specifications
218