2003 Ford F150 Owner Guide 5th Printing - Page 73

Driver Controls To stow the bed extender, follow steps one through four in reverse order. The bed extender may be used to secure a load of up to 46 kg (100 lbs.) on the tailgate. The bed extender should always be kept in the stowed position with the tailgate closed when not in use. When driving the vehicle off road, the bed extender should be removed and the tailgate closed. To remove the bed extender: 1. Extend the bed extender. 2. Pull the round knobs on each side of the extender to unlock it. Make sure the locking clip screws are loose before removing the extender. 3. Press the locking clips below the middle bar on each side and lift the extender out of the bed. To install the bed extender, follow the removal procedure in reverse order. TONNEAU COVER (IF EQUIPPED) The tonneau cover has been designed to maximize fuel economy and should be fully installed whenever possible. The cover can be rolled up and stowed behind the cab, or removed completely from the vehicle. • To avoid damage to the cover, do not operate the vehicle unless the cover is fully installed, or securely stowed. The removal and stowage for styleside and flareside vehicles are basically the same except where noted. To remove or stow the cover: 1. Styleside only: In cold weather lower tailgate and release the levers on each side of the rear rail to release tension on the cover. 73 2003 F150 (f12) Owners Guide (post-2002-fmt) USA English (fus)