2004 Ford Ranger Owner Guide 3rd Printing - Page 52
2004 Ford Ranger Manual
Page 52 highlights
Driver Controls 4. Evenly push down on the extender and push the round knobs in on each side locking it in place. Green markings on the shaft indicate the locked position. The locking clip screws below the middle bar can be tightened counterclockwise for extra security. Note: If the red marking on the shaft is visible, the bed extender is not locked or properly secured. To stow the bed extender, follow steps one through four in reverse order. The bed extender may be used to secure a load of up to 46 kg (100 lbs.) on the tailgate. The bed extender should always be kept in the stowed position with the tailgate closed when not in use. When driving the vehicle off road, the bed extender should be removed and the tailgate closed. To remove the bed extender: 1. Extend the bed extender. 2. Pull the round knobs on each side of the extender to unlock it. Make sure the locking clip screws are loose before removing the extender. 3. Press the locking clips below the middle bar on each side and lift the extender out of the bed. Note: Remove and store the bed extender when not in use. To install the bed extender, follow the removal procedure in reverse order. 52 2004 Ranger (ran) Owners Guide (post-2002-fmt) USA English (fus)