2004 Ford Ranger Owner Guide 3rd Printing - Page 56
2004 Ford Ranger Manual
Page 56 highlights
Locks and Security To reprogram the remote entry transmitters: 4 1. Ensure the vehicle is 3 electronically unlocked. 5 2. Put the key in the ignition. 2 3. Turn the key from the 2 (LOCK) position to 3 (OFF). 1 4. Cycle eight times rapidly (within 10 seconds) between the 3 (OFF) position and 4 (ON). Note: The eighth turn must end in the 4 (ON) position. 5. The doors will lock, then unlock, to confirm that the programming mode has been activated. 6. Within 20 seconds press any button on the remote entry transmitter. Note: If more than 20 seconds have passed you will need to start the procedure over again. 7. The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed. 8. Repeat Step 6 to program each additional remote entry transmitter. 9. Turn the ignition to the 3 (OFF) position after you have finished programming all of the remote entry transmitters. Note: After 20 seconds, you will automatically exit the programming mode. 10. The doors will lock, then unlock, to confirm that the programming mode has been exited. Illuminated entry The interior lamps illuminate when the remote entry system is used to unlock the door(s) or sound the personal alarm. The illuminated entry system will turn off the interior lights if: • the ignition switch is turned to the ON position, or • the remote transmitter lock control is pressed, or • after 25 seconds of illumination. The inside lights will not turn off if: • they have been turned on with the dimmer control, or • any door is open. The battery saver will shut off the interior lamps after several minutes if they are left on accidentally. 56 2004 Ranger (ran) Owners Guide (post-2002-fmt) USA English (fus)