2006 Ford Focus Owner Guide 4th Printing - Page 207

Maintenance and Specifications Fluid Ford Part Name Windshield Motorcraft washer fluid Premium Windshield Washer Concentrate 1 2 Application All Capacity 5.1 quarts (4.8L) Add the coolant type originally equipped in your vehicle. Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle or as listed in the Owner Guide. Check the container to verify the fluid being added is of the correct type. Refer to your scheduled maintenance information to determine the correct service interval. Some transmission fluids may be labeled as dual usage, such as MERCON௡ and MERCON௡ V. These dual usage fluids are not to be used in an automatic transmission that requires use of the MERCON௡ type fluid. However, these dual usage fluids may be used in transmissions that require the MERCON௡ V type fluid. MERCON௡ and MERCON௡ V type fluids are not interchangeable. DO NOT mix MERCON௡ and MERCON௡ V. Use of a transmission fluid that indicates dual usage (MERCON௡ and MERCON௡ V) in an automatic transmission application requiring MERCON௡ may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage. 3 Approximate dry fill capacity including transmission fluid cooling system, actual refill capacities will vary based on vehicle application and transmission fluid cooling system (i.e. coolers size, cooling lines, auxiliary cooler capacities). The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. The manual transmission service refill capacity is determined by filling the transaxle to the bottom of the filler hole with the vehicle on a level surface. Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. 4 207 2006 Focus (foc) Owners Guide (post-2002-fmt) USA (fus)