2006 Ford Focus Owner Guide 4th Printing - Page 35

Lights Replacing tail/brake/backup lights and turn signal bulbs (sedan) 1. Make sure the headlamp control is in the OFF position and then open the trunk. 2. From inside the luggage compartment remove the three wing nuts of the light housing. 3. Gently pull the light housing to the outside. 4. Turn the bulb socket counterclockwise and pull it out. 5. Pull the bulb straight out of the socket. Install in reverse order. Replacing tail/brake/backup lights and turn signal bulbs (wagon) 1. Make sure the headlamp control is in the OFF position and then open the hatchback. 2. Using a screwdriver, remove the fixings and trim from the body. 3. Remove the socket from the lamp assembly 4. Pull the bulb straight out of the socket. Install in reverse order. Replacing foglamp bulbs (if equipped) 1. Make sure the headlamp switch is in the OFF position. 2. Remove the front shield from the bumper. 3. Reach under the front fender, and remove the bulb socket from the foglamp by turning counterclockwise. 4. Disconnect the electrical connector. Install the new bulb in reverse order. 35 2006 Focus (foc) Owners Guide (post-2002-fmt) USA (fus)