2007 Ford F350 Owner Guide 2nd Printing - Page 193

Driving Shifting from 4H (4WD High) to 2H (2WD High) Move the transfer case lever to 2H 2H (2WD High) at a stop or a vehicle speed below 3 mph (5 km/h). 4H With the vehicle at complete stop, N disengage the locking hubs (optional) by rotating the hub lock 4L control from LOCK to FREE. • For proper operation, make sure that both indicator arrows on the hub are aligned, and that both hubs are set to FREE Shifting from 4H (4WD High) to 4L (4WD Low) 1. Bring the vehicle to a speed below 3 mph (5 km/h). 2. Place the gearshift lever in N (Neutral). If the vehicle is equipped with a manual transmission, also depress the clutch pedal. 3. Move the transfer case shift lever 2H through N (Neutral) directly to 4L (4WD Low). If the shift lever does 4H not, or only partially moves to the N 4L (4WD Low) position, perform a shift with the transmission in N 4L (Neutral) (or clutch pedal depressed) and the vehicle rolling at a speed below 3 mph (5 km/h). This will ensure the transfer case is fully engaged into 4L (4WD Low). Shifting from 4L (4WD Low) to 4H (4WD High) or 2H (2WD High) 1. Bring the vehicle to a speed below 3 mph (5 km/h). 2. Place the gearshift lever in N (Neutral). 3. Move the transfer case shift lever 2H through N (Neutral) directly to 4H (4WD High) or 2H (2WD High). 4H 4. If the transfer case will not N engage into 4H (4WD High) or 2H (2WD High), allow the vehicle to 4L move at a speed above 1 mph (1.6 km/h), then repeat steps 2 and 3. 5. If shifting to 2H (2WD High) with the vehicle at a complete stop, disengage the locking hubs (optional) by rotating the hub lock control from LOCK to FREE. 193 2007 F-250/350/450/550 (f23) Owners Guide (post-2002-fmt) USA (fus)