2008 Ford F150 Owner Guide 1st Printing - Page 123

Driver Controls Erasing HomeLinkா buttons To erase the three programmed buttons (individual buttons cannot be erased): • Press and hold the two outer HomeLink௡ buttons until the indicator light begins to flash-after 20 seconds. Release both buttons. Do not hold for longer that 30 seconds. HomeLink௡ is now in the train (or learning) mode and can be programmed at any time beginning with Step 1 in the "Programming" section. Reprogramming a single HomeLinkா button To program a device to HomeLink௡ using a HomeLink௡ button previously trained, follow these steps: 1. Press and hold the desired HomeLink௡ button. Do NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink௡ button, follow Step 1 in the "Programming" section. For questions or comments, contact HomeLink௡ at www.homelink.com or 1-800-355-3515. MINI MESSAGE CENTER ELECTRONIC COMPASS/TEMPERATURE DISPLAY (IF EQUIPPED) Outside air temperature The outside temperature display is contained in the instrument cluster and displays all the time, except when a warning message is present. To turn the display off or change the display from English to Metric see your authorized dealer. Compass The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antennas. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy. 123 2008 F-150 (f12) Owners Guide (post-2002-fmt) USA (fus)