2008 Ford F150 Owner Guide 1st Printing - Page 149

Locks and Security Sounding a panic alarm Press to activate the alarm. Press again or turn the ignition to 2 (ACCESSORY) or 3 (ON) to deactivate. Note: The panic alarm will only operate when the ignition is in the 1 (OFF/LOCK) position. Memory seat/adjustable pedals feature (if equipped) The remote entry system can also control the memory feature. Press the control once to unlock the driver's door. Pressing the control will automatically move the seat and adjustable pedals to the desired memory position (the memory position corresponds to the transmitter being used). Activating the memory feature To activate this feature: 1. Position the seat and adjustable pedals to the positions you desire. 2. Press the SET control on the driver's seat. 3. Within five seconds, press one control on the remote transmitter and then press the 1 or 2 control on the driver's door panel to which you would like to associate with Driver 1 or Driver 2 positions. 4. Repeat this procedure for another remote transmitter if desired. Deactivating the memory feature To deactivate this feature: 1. Press the SET control on the driver's door seat. 2. Within five seconds, press any control on the remote transmitter which you would like to deactivate and then press the SET control on the driver's door panel. 3. Repeat this procedure for another remote transmitter if desired. Replacing the battery The remote entry transmitter uses one coin type three-volt lithium battery CR2032 or equivalent. 149 2008 F-150 (f12) Owners Guide (post-2002-fmt) USA (fus)