2008 Ford F150 Owner Guide 1st Printing - Page 384

384 Item Capacity Ford part name or equivalent Ford part number / Ford specification Fuel tank Reg. Cab 8' box / SuperCab 6.5' box / SuperCab 8' box - - Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. 2 1 27.0 gallons (102.2L) Standard 35.7 gallons (135.1L) Optional Add the coolant type originally equipped in your vehicle. 2008 F-150 (f12) Owners Guide (post-2002-fmt) USA (fus) Service refill capacity is determined by filling the axle to 1/4-9/16 inch (6-14 mm) below the bottom of the filler hole with the vehicle on a level surface. Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A, for complete fill of 8.8 inch and 9.75 inch Traction-Lok axles. 4 3 Service refill capacity is determined by filling the axle to the bottom of the filler hole with the vehicle on a level surface. Maintenance and Specifications For 10.25 inch Traction-Lok axles, use 6.5 pints (3.1L) of Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant and 8 oz. (236 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A. Your vehicle's rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for life. These lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. Service refill capacity is determined by filling the transfer case to the bottom of the filler hole with the vehicle on a level surface. Approximate dry fill capacity including transmission fluid cooling system, actual refill capacities will vary based on vehicle application and transmission fluid cooling system (i.e. coolers size, cooling lines, auxiliary cooler capacities). The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Automatic transmissions that require MERCON௡ V should only use MERCON௡ V fluid or fluid that is specified dual usage MERCON௡/MERCON௡ V. Refer to scheduled maintenance information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. 8 7 6 5