2010 Ford Edge Scheduled Maintenance Guide 2nd Printing - Page 23

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 105,000 miles Change engine oil and replace oil filter Change manual transmission fluid (except Escape) Replace cabin air filter (if equipped) Change rear axle fluid only on vehicles equipped with DANA axles (see Special Operating Conditions on page 41 and Exceptions on page 47) Change engine coolant (see Engine Coolant Change Interval on page 6 and Coolant Change Record on page 48) Inspect steering linkage, ball joints, suspension, tie rod ends, driveshaft, and U-joints (lubricate if equipped with Zerk fittings) Torque the rear U-bolts (Transit Connect only) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect automatic transmission fluid level (if equipped with an underhood dipstick) Inspect and lubricate 4x4 front axle U-joints Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: Normal Schedule Trucks, Fullsize Vans & SUVs 112,500 miles ❑ Change engine oil and replace oil filter ❑ Inspect cabin air filter (if equipped) ❑ Rotate tires, inspect tires for wear and measure tread depth DEALER VALIDATION: ❑ Inspect the wheels and related components for abnormal noise, wear, looseness, or drag ❑ Perform multi-point inspection (recommended) RO#: DATE: P&A CODE: MILEAGE: Scheduled Maintenance 23 2010 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 2nd Printing USA (fus)