2010 Ford Edge Scheduled Maintenance Guide 2nd Printing - Page 40

NORMAL SCHEDULE CARS & CUVS 150,000 miles ❑ Change engine oil and replace oil filter ❑ Change engine coolant (see Engine Coolant Change Interval on page 6 and Engine Coolant Change Record on page 48) Change automatic transmission fluid Replace automatic transmission fluid filter (except 5F55, 6F35 and AWF-21 transaxles) Change manual transmission fluid Replace rear axle lubricant on all rear wheel drive (RWD) vehicles (see pages 41 and 47). Replace climate-controlled seat filter (if equipped) Replace engine air filter Replace cabin air filter (if equipped) Replace fuel filter (Crown Victoria, Grand Marquis, Town Car and Mustang) Replace accessory drive belt(s) if not replaced in the last 100,000 miles (160,000 km) Inspect and lubricate steering linkage, ball joints, suspension, tie rod ends, driveshaft and U-joints (lubricate if equipped with grease fittings) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 40 Scheduled Maintenance 2010 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 2nd Printing USA (fus)