2012 Ford Transit Connect Owner Guide 1st Printing - Page 21

Instrument Cluster 2. Trip odometer: Registers the distance of individual journeys. Press the Reset button (4) until the trip odometer resets. 3. Odometer: Registers the miles (kilometers) of the vehicle. 4. Reset button: Press until the trip odometer resets. Note: The information display will remain on for several minutes after you switch off the ignition. If SHON or SHIP ON is displayed, the vehicle shipping mode is switched on. Have your dealer switch off the vehicle shipping mode. Information display with clock 1 2 3 5 4 1. Distance to empty / clock: Registers the approximate distance the vehicle can travel before refueling is necessary. Clock shows the current set time. Switching the display between "clock" and "distance to empty": • Vehicles with AM/FM radio: Press and release the Select button (4) to switch between the "distance to empty" display and the clock display. • Vehicles with AM/FM radio/CD player: "Distance to empty" information is displayed normally. Press and hold the Select button (4) to switch to the "clock" display. After releasing the button, "distance to empty" will display again. Setting the clock: Vehicles with AM/FM radio: Press and hold the Select button (4) until the time flashes in the display. Press the Select button (4) to set the time. Vehicles with AM/FM radio / CD player: Use the radio to set the time. See Setting the clock in the Entertainment chapter. 21 PAGE POSITION: 21 JOB: @zeta.tweddle.com/ford_pdm/ford/own2002/835536-en-tst/og pubnum: