2013 Ford Expedition Owner Manual Printing 3 - Page 116

Information Displays Compass zone adjustment 115 3 2 4 5 1 15 14 13 12 6 7 8 9 1011 1. Determine which magnetic zone you are in for your geographic location by referring to the zone map. 2. Start the engine. 3. Press SETUP to reach the reset for zone setting screen. 4. Press and hold RESET until the message center display prompts you to reset the current zone setting. Press RESET. 5. Press and release RESET until the message center display changes to show the current zone setting (XX). 6. Press and release the RESET button repeatedly until the correct zone setting for your geographic location is displayed on the message center. 7. Press and release SETUP and allow the setup timer to expire to exit the procedure or press INFO to exit. Compass calibration adjustment Note: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, wiper, etc.) and make sure all the doors are closed Note: If the RESET button is pressed or three minutes has expired, the display will go back to the INFO menu and will show CAL instead of the compass heading until the compass is calibrated. 1. Press RESET to start the compass calibration function. 2. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED. It will take up to five circles to complete calibration. 3. The compass is now calibrated. • ENGLISH / FRENCH / SPANISH RESET FOR NEW: Allows you to choose which language the message center will display in. Press RESET to cycle through each of the language choices. Press and hold RESET for two seconds to set the language choice. 2013 Expedition (exd) Owners Guide gf, 3rd Printing, April 2013 USA (fus)