2013 Ford Expedition Owner Manual Printing 3 - Page 76

Locks 75 To program additional personal entry codes, repeat Steps 1-3, then for Step 4: • press 3•4 to save personal entry code 2, or • press 5•6, 7•8, or 9•0 to save personal entry code 3. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code will work even if you have set your own personal code. Programming Memory to a Personal Entry Code To program a personal entry code to recall a driver memory setting, repeat Steps 1-4 above. • Pressing 1•2 on the keypad in Step 4 will program the code to driver memory setting 1. • Pressing 3•4 in Step 4 will program the code to driver memory setting 2. Note: Pressing 5•6, 7•8, or 9•0 keypad numbers in Step 4 will not program the code to recall a driver memory setting. Note: The factory-set code cannot be associated with a memory setting. Erasing a Personal Code 1. Enter the factory-set 5-digit code. 2. Press and release the 1•2 on the keypad within five seconds. The doors will lock and then unlock to confirm that the system is in programming mode. 3. Press and hold the 1•2 for two seconds. You must do this within five seconds of completing Step 2. All personal codes are now erased and only the factory-set 5-digit code will work. 2013 Expedition (exd) Owners Guide gf, 3rd Printing, April 2013 USA (fus)