2013 Ford Flex Owner Manual Printing 4 - Page 65

64 Keys and Remote Control Integrated Keyhead Transmitter 1. Twist a thin coin in the slot near the key 1 ring to remove the battery cover (1). 2. Carefully peel up the rubber gasket (2) 2 from the transmitter if it does not come off with the battery cover. 3 3. Remove the old battery (3). 4. Insert the new battery. Refer to the instructions inside the integrated keyhead transmitter for the correct orientation of the battery. Press the battery down to ensure that the battery is fully seated in the battery housing cavity. 5. Reinstall the rubber gasket. 6. Snap the battery cover back onto the key. Intelligent Access Transmitter 1. Remove the backup key from the transmitter. 2. Twist a thin coin under the tab hidden behind the backup key head to remove the battery cover. Do not use the backup key to remove the cover or you could damage the intelligent access key. 3. Remove the old battery. 4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing. 2013 Flex (471) Owners Guide gf, 4th Printing, December 2012 USA (fus)